Heat Aerosol Fire Extinguishing Device
- Rapid fire suppression with no water damage.
- Can be integrated into existing systems to enhance safety.
- Capable of withstanding harsh environments.
- High-performance sensors for early fire detection and response.
- DIN-rail mountable; easy to install and store in confined spaces.
Product Overview & Applications:
Selection recommendation
1 m³, for example, requires 100g hot aerosol fire extinguishing stickers
10g Hot aerosol fire extinguishing device: protected area 0.1mm³
20g Hot aerosol fire extinguishing device: protected area 0.2mm³
30g Hot aerosol fire extinguishing device: protected area 0.3mm³
40g Hot aerosol fire extinguishing device: protected area 0.4mm³
Distribution box selection
L：0.8m W:0.6m H:0.15m
Calculation formula by volume = length x width X height
The volume of the distribution box =0.8×0.6×0.15=0.072m³
0.072 large electric box, choose 10g hot aerosol fire extinguishing device
Technical Parameters
Item | Specification |
| Product Name | Aerosol Fire Extinguishing Agent |
| Fire Extinguishing Dose | 10g / 20g / 30g / 40g |
| Operating Temperature | -50°C ~ +90°C |
| Shell Temperature Resistance | < 200°C |
| Fire Extinguishing Concentration | 100 g/m³ |
| Automatic Activation | Open flame or temperature > 170°C |
Warm reminder：
1. During installation and use, read the instructions carefully and prepare corresponding protective measures to standardize operation.
2. During the installation process, the nozzle of the fire extinguishing device cannot be directly aimed at the human body.
3. During the installation, maintenance, and repair process, it is necessary to ensure that the line does not short-circuit, which may lead to equipment failure or misstart.
4. Before the fire extinguishing device is discharged, ensure that the nozzle is closed.
To ensure reliable performance.
5. Ensure that there are no obstacles within 50mm of the device nozzle, and do not
It is suitable to install it at the lower air outlet of the protective space;
6. Fire extinguishing devices should not be installed in environments that are susceptible to rain or watering, have high pH and are corrosive.
Paste Installation Method
